高光谱激光雷达谱位合一的角度效应分析

高光谱激光雷达以其谱位合一的技术优势为实现超三维精准遥感观测提供了可行途径,因此成为当前激光雷达与高光谱遥感领域共同大力推进的前沿发展方向。目前已有多型原型系统研发出来并得到了原理性验证,然而针对其数据处理核心环节问题的基础技术仍较为欠缺。典型问题之一是不同波段回波信号受激光入射角度的影响,该角度效应限制了高光谱激光雷达实现高性能遥感。以芬兰空间信息研究所高光谱激光雷达原型系统扫描桦树树干为例探讨了该角度效应,发现了不同激光波段对不同入射角度的回波强度响应模式,推导出了角度效应的基本规律及其精细尺度的统计规律,为后续该方向的系统研发、数据处理及信息提取等提供了可借鉴的底层机理与技术基础。     

基于微型塌落筒和稠度漏斗的膏体充填料浆流变参数预测研究

充填料浆流变参数的准确测定是合理评价其管道输送特性的关键，目前充填料浆流变参数主要采用流变仪测试，工程适用性较差。基于圆锥塌落筒模型和圆柱塌落筒模型，结合流变仪测试，对比分析了不同形状尺寸塌落筒测试屈服应力的准确性，确定了微型塌落筒最佳形状尺寸为柱形 100 mm×100 mm；在此基础上构建了屈服应力-塌落度关系模型，经验证在无量纲屈服应力范围为 0~0.1 时该模型可以准确计算料浆屈服应力；通过自制稠度漏斗测试充填料浆流出时间，探索流变仪测试塑性粘度与流出时间关系，结果表明相同质量浓度时，料浆流出时间与其塑性粘度呈负相关关系，料浆质量浓度变化时其流出时间与塑性粘度关系不明显。     

单立柱堆垛机有限元振动分析

针对单立柱堆垛机运行过程中加减速对立柱产生的振动激励问题,以某单立柱堆垛机为研究对象进行有限元振动分析。建立该堆垛机的有限元仿真模型,基于不同加减速策略进行对比分析。分析结果表明,十五段S形加减速策略对单立柱堆垛机的振动激励最小,能够提高堆垛机的定位效率。     

Modified sepiolite/PVDF-HFP composite film with enhanced piezoelectric and dielectric properties

Flexible film with both piezoelectric and dielectric properties is considered to be a potential candidate for the energy conversion and storage devices. In this study, the Li⁺ and H₂O modified sepiolite/poly(vinylidene fluoride-co-hexafluoropropylene) (LiSEP-H₂O/PVDF-HFP) composite films with both good piezoelectric and dielectric properties were prepared by traditional coating process. When the H₂O content was 13 wt %, the LiSEP-H₂O/PVDF-HFP composite exhibited high d₃₃ of 32 and dielectric constant of 48. Moreover, the effects of the Li⁺ and adsorbed H₂O on the d₃₃, F(β), dielectric constant, short-circuit currents were discussed. The adsorbed H₂O enhanced the β-phase by the hydrogen bonds and Li⁺ improved the polarization to realize the composite film with increased piezoelectric and dielectric properties respectively. We expected the common modification to lead other clay minerals realizing the future applications in the adjustment of composites' electric properties. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48412.     

耐腐蚀水性铝颜料的制备及表征

为了提高铝颜料在水性涂料中的耐腐蚀性能，以正硅酸乙酯（ TEOS）为前驱物，通过溶胶-凝胶反应在铝颜料表面形成了一层致密的二氧化硅包覆薄膜，通过优化固含量、溶剂种类及 TEOS的用量，提高铝颜料的耐碱性。利用扫描电镜、刮板试验、接触角测试、析氢实验进行表征，结果表明：以无水乙醇为溶剂，铝金属颜料固含量为 10%，升温至 50 ℃后，逐滴加入 6 g TEOS，再升温至 80 ℃，该条件下制备的 SiO₂膜包覆后的铝颜料具有优异的耐碱性，同时表面性能由疏水性转变成亲水性，对铝颜料起到了很好的保护作用。     

Effects of risks on the performance of business process outsourcing projects: The moderating roles of knowledge management capabilities

Although business process outsourcing (BPO) can reduce cost and enhance the competitiveness of firms, the implementation of BPO projects is unsatisfactory. By integrating knowledge management capability theory and risk-based view, we develop a model of how different types of BPO risks affect project satisfaction and how knowledge management capability changes the influences of BPO risks. A survey of 121 BPO projects was conducted among BPO client department manager and project manager through a pairwise design. Empirical evidence reveals that social system, technical system, and project management risks negatively affect BPO project satisfaction. However, cultural, technological, and structural levels of knowledge management capabilities weaken the negative risk effects of social system, technical system, and project management, respectively. Different types of risks and knowledge management capabilities should be matched to achieve effective risk management.     

Role of Co in formation of Ni-Ti clusters in maraging stainless steel

The effect of Co addition on the formation of Ni-Ti clusters in maraging stainless steel was studied by three dimensional atom probe (3DAP) and first-principles calculation. The cluster analysis based on the maximum separation approach showed an increase in size but a decrease in density of Ni-Ti clusters with increasing the Co content. The first-principles calculation indicated weaker Co-Ni (Co-Ti) interactions than Co-Ti (Fe-Ti) interactions, which should be the essential reason for the change of distribution characteristics of Ni-Ti clusters in bcc Fe caused by Co addition.     

Modelling the cross‐contamination of Listeria monocytogenes in pork during bowl chopping

This study has developed a predictive model for the cross‐contamination of pork by Listeria monocytogenes during bowl chopping. The transfer rates of L. monocytogenes were measured in sixteen chopping scenarios based on practical work. Meanwhile, contaminated bowl chopper was cleaned with either a dry rag (DR), warm water (WW) or 70% ethanol + water (EW), respectively. It was showed that significant differences (P < 0.05) were observed among the three cleaning methods on the reduction of L. monocytogenes, the greatest log reduction being achieved by EW. Moreover, the model introduced by a previous study, predicting cross‐contamination of L. monocytogenes during meat slicing, was improved and validated in this study. Verification results showed that the improved model was acceptable for predicting L. monocytogenes cross‐contamination during pork chopping with coefficients of determination (R² > 0.82), accuracy factors (A_f < 1.44), bias factors (B_f < 1.42), and root mean square error (RMSE < 0.99). Furthermore, the modified model might provide an effective tool for assessing the risk of the cross‐contamination of meat products.